Кожаный портмоне своими руками влёгкую

Leather Wallet | Easy DIY
Index of operation and materials:
All cutting done with a box cutter and steel ruler
I used the pattern on my cutting mat for measuring cuts
0:39 10mm hole punch
1:03 5mm hole punch
1:27 beveling tool
1:58 thinning down the inner side of the card holder
2:25 Sanding edges to smooth everything out
2:55 Folding the two piece of leather together to mark button location
3:24 Setting in the clip button
3:46 Fake chamois leather from a pair of boots
4:13 Dyeing the cuts with brown leather dye
4:52 Leather finish to seal edges
5:10 Burnishing with a pen (anything that fits will work)
5:46 Glueing cards pockets with contact adhesive
7:04 Glueing backing again with contact adhesive (same boots fake leather)
7:49 Glueing two parts of the wallet, care where you add glue
8:23 Sanding edges to make everything nice and square, but also slightly rounding edges.
9:06 Beveling sanded edges to break corners (also sanded off camera)
9:30 Cutting groove for the stitches
9:58 Punching stitches holes with forks
10:28 Leather finish on edges and burnishing
11:12 Sewing with waxed thread
12:17 Weathering outside by removing some color from the leather with alcohol
12:50 Branding iron I made a while back
12:00 Vintage looking numbers
Off camera I also applied more leather finish and cleaned well with rag.