Как сделать супер-прочную рукоять из пробкового дерева для обычного ножа

92
vOFF4ik
vOFF4ik78432189

    Cork Stabilization IKEA Pot Stand
    Index of operation and materials:
    0:15 Marking two pieces
    0:27 Cutting with bandsaw
    0:54 Checking moisture content, needs to be as close to 0% as possible
    1:05 Locking down pieces l so they don’t float in the stabilizing resin
    1:15 Completely covering in stabilizing resin
    1:28 Slowly raising vacuum to prevent excessive bubbling
    1:55 Taking to maximum vaccum and holding it for 4 hours
    2:06 Slowly releasing vacuum.
    2:24 Parts needs to be left soaking inside the stabilizing resin after releasing vacuum. (overnight 12 hours)
    2:33 Packing each piece individually in aluminum foil
    2:57 Lefover resin can be collected and used over and over
    3:08 Curing resin (stabilizing resin activates with heat) 2 hours at 95°C (203°F)
    3:45 Grinding to shape
    4:40 Harder and stiffer than regular cork for sure
    4:53 Drilling some holes
    5:09 Cutting off excess material
    5:37 Glueing with epoxy resin
    6:20 More grinding on the 2x72 belt grinder, this material is so easy to grind btw
    7:25 Mandatory hand sanding up to 1200 grit
    8:10 Boiled linseed oil as finish, cork really absorb a lot of oil.

    Комментарии

    Для добавления комментариев необходимо авторизоваться.