Нож EDC с хирургическими титановыми штифтами

EDC Knife With Surgical Titanium PinsScrews.
Index of operation and materials:
0:06 Marking shape with 3D printed pattern and spray paint
0:24 Cutting with metal cutting bandsaw
0:56 Grinding to shape with 2x72 belt grinder
1:52 Center punching
2:06 Drilling pin holes
2:26 Marking center line
2:42 Grinding bevels with 2x72 belt grinder
3:34 Hardening, heating up to 820°C, holding for 15 min and quenching in vegetable oil
4:14 Hand sanding up to 400 grit
5:20 Etching with ferrich chlorice
5:30 Cutting pins from titanium screw with dremel
6:22 Making a mosaic pin with titanium nails
7:56 Cutting olive wood to size
8:05 Grinding to 15°
8:20 Glueing up scales with epoxy resin
9:43 Match drilling pin holes on scales
10:17 Cutting to size with band saw
10:42 Grinding and finishing bolster
11:05 Finishing to 1000 grit to prevent scratching the blade finish once scales are glued
11:37 Always degrease parts before glue
11:52 Glueing up everything
12:40 Belt grinder to remove eccess material
13:18 Hand sanding up to 1200 grit
14:30 White mineral oil
10:45 Adding microbevel with MadEdge jig and stones (up to 5000)